Line 6 StageSource L3t
Description
Yamaha LL-TA All Solid TransAcoustic Guitar
Yamaha LL-TA TransAcoustic guitar boasts immersive reverb and lush chorus effects, without even needing an amp or other external gear. Great for recreational guitarists, the LL-TA has an A.R.E.-treated solid Engelmann spruce top with rosewood back and sides. Modified non-scalloped bracing retains the L-series’ characteristic bright tone while enhancing the low end.
- Traditional western body design
- Solid Engelmann spruce top with A.R.E. treatment
- Solid rosewood back & sides
- Amazing sounding reverb/chorus built-into the guitar with no need for external amplification or effects
- Designed to provide superb acoustic guitar sound
Actuator
An actuator installed on the inner surface of the guitar back vibrates in response to the vibrations of the strings. The vibrations of the actuator are then conveyed to the body of the guitar, and to the air in and around the guitar body, generating authentic reverb and chorus sounds from inside the body.
Simple Controls
Three simple knobs let you adjust the degree of effect applied and the lineout volume level. Additionally, keeping the controls small minimizes the area of the holes in the body material, reducing acoustic sound loss.
(A) Chorus Control
(B) Reverb Control (Room / Hall)
(C) TA Switch / Line Out Volume Control
- Pressing the TA Switch for more than 0.3 seconds activates the TA function.
- When a cable is connected to the line-out jack, the lineout volume can be adjusted by rotating the (C) knob.
- The reverb type switches from Room to Hall around the 12:00 position.
Newly Designed Battery Box
Battery box integrated into the end-pin jack. This requires fewer holes in the body, thus reducing acoustic sound loss. Connect the cable from the jack to a PA or amp to use as an acoustic electric guitar.
